The purpose of eps machine delivery inspection is to verify whether the equipment quality and configuration are qualified. All equipment can be delivered only after passing the strict delivery inspection. How to inspect the ex factory eps machine?

The appearance of eps machine is uniform in color, without exposed primer, and the film adhesion is good. The paint surface shall be free of flow marks, wrinkles and half-point damage defects.

 The plating of the electroplated parts of the equipment shall be free from peeling, demoulding, mildew and rust. The opening and closing of all cabin doors shall be flexible.

 Check whether the indicator light of foam equipment is normal and record the status of the indicator light.

 Switch on and off the power supply for a single device for several times, and observe whether it can work normally and start, and whether there is abnormal noise in abnormal operation.

As cement and other raw materials are difficult to clean, the function test of the mixing and pumping system is generally a water test rather than a physical test, but the foaming system should be a physical test, and the size of the foam capsules diluted with foaming agent and aqueous solution should be uniform. The above inspection shall be carried out for foam equipment before delivery